Introduction to QDY-CD 1 Harmonic Reducer
The QDY-CD1 series features a cup-shaped short cylindrical flexure. The input shaft directly mates with the inner bore of the wave generator, connected via a key or screw. It is generally used with the rigid wheel end fixed and the flexure end outputting.
QDY-CD 1 Harmonic Reducer Performance Parameters
Model/Project | Reduction ratio | Rated torque at 2000 rpm input | Maximum allowable torque during start-up and shutdown | Maximum allowable torque under average load | Instantaneous maximum allowable torque | Maximum permissible input speed (for grease) | Permissible average input speed (grease) | Back gap | Design life |
NM | NM | NM | NM | RPM | RPM | Arc Sec | Hours | ||
14 | 50 | 3.6 | 11.5 | 4.7 | 23 | 8000 | 3500 | ≤30 | >10000 |
80 | 5.2 | 15 | 6.2 | 30 | ≤30 | >10000 | |||
100 | 5.4 | 18 | 7.7 | 35 | ≤30 | >10000 | |||
17 | 50 | 11 | 23 | 18 | 48 | 7000 | 3500 | ≤30 | >10000 |
80 | 14 | 29 | 21 | 54 | ≤30 | >10000 | |||
100 | 16 | 37 | 27 | 70 | ≤30 | >10000 | |||
20 | 50 | 17 | 38 | 24 | 68 | 6000 | 3500 | ≤30 | >10000 |
80 | 23 | 50 | 29 | 79 | ≤30 | >10000 | |||
100 | 28 | 57 | 34 | 95 | ≤30 | >10000 | |||
25 | 50 | 26 | 66 | 36 | 121 | 5500 | 3500 | ≤30 | >10000 |
80 | 42 | 91 | 62 | 157 | ≤30 | >10000 | |||
100 | 47 | 108 | 72 | 175 | ≤30 | >10000 | |||
120 | 47 | 111 | 72 | 187 | ≤30 | >10000 | |||
32 | 50 | 50 | 145 | 70 | 256 | 4500 | 3500 | ≤30 | >10000 |
80 | 80 | 203 | 126 | 350 | ≤30 | >10000 | |||
100 | 91 | 220 | 145 | 400 | ≤30 | >10000 | |||
120 | 92 | 235 | 145 | 425 | ≤30 | >10000 |
Product Introduction:
Harmonic Gear Reducers consist of a fixed internal gear, a flexible gear, and a wave generator that causes radial deformation of the flexible gear. Harmonic Gear Reducers are a new type of transmission structure among gear reducers. They utilize the controllable elastic deformation wave generated by the flexible gear to cause relative tooth misalignment between the teeth of the rigid and flexible gears, thereby transmitting power and motion. This transmission method differs fundamentally from ordinary gear transmission, possessing unique characteristics in meshing theory, set calculations, and structural design. Harmonic gear reducers offer advantages such as high precision and high load-bearing capacity. Compared to ordinary reducers, they use 50% less material, reducing their volume and weight by at least one-third.
Core Features:
Small and lightweight; High transmission precision; Large transmission ratio; Simple and compact structure, easy installation; High load-bearing capacity, capable of transmitting motion to confined spaces; High transmission efficiency, smooth operation.
Product Characteristics:
High dynamic precision and accurate control: Multi-tooth meshing achieves error averaging, resulting in small transmission errors and enabling zero or low backlash meshing. Reverse transmission has no idle stroke, providing outstanding positioning accuracy.
Wide transmission ratio range and strong adaptability: Single-stage transmission ratios can reach 30~320, and double-stage transmission ratios can reach thousands, meeting different speed requirements without complex transmission chains.
High load-bearing capacity and high reliability: The tooth surfaces are in surface contact, resulting in uniform force distribution. The flexible wheel is made of high-strength materials, ensuring high load-bearing capacity.
Compact structure and lightweight design: Composed of only three core components—a rigid wheel, a flexible wheel, and a wave generator—it is small in size and light in weight, facilitating installation in confined spaces.
Smooth transmission and high efficiency: Gradual entry and exit meshing of the gear teeth eliminates impact, resulting in low operating noise and vibration.
Unique functional characteristics and wide applicability: Coaxial design of input and output shafts facilitates easy installation and provides strong transmission stability.
Application Examples
Six-axis/multi-axis industrial robots, CNC rotary tables, laser cutting
At Qiandeyi Transmission Technology (Suzhou) Co., Ltd., we focus on the research, development, manufacturing, and service of Precision Transmission Components for intelligent and automated equipment. Since our establishment in 2013, we have been committed to providing reliable drive solutions for global customers in industrial robotics, CNC equipment, automated production lines, logistics systems, new energy equipment, and other advanced manufacturing industries.
Our QDY-CDUH Harmonic Gear Reducers are designed for applications requiring high precision transmission, high reduction ratio, low backlash, high torque density, compact structure, and stable operation. By combining advanced harmonic drive technology with strict manufacturing processes, we provide precision transmission products that help automation equipment achieve accurate movement and reliable performance.
With the rapid development of intelligent manufacturing, automation equipment is becoming faster, smaller, and more precise. Industrial robots, collaborative robots, semiconductor equipment, and smart production systems all require transmission components that can maintain stable accuracy during frequent movement and continuous operation.
The transmission system directly affects the positioning accuracy, response speed, and service life of equipment. A high-quality harmonic gear reducer can help machines reduce motion errors, improve production consistency, and maintain reliable operation under complex industrial conditions.
The QDY-CDUH Harmonic Gear Reducers use a precision harmonic transmission structure consisting of a wave generator, flex spline, and circular spline. Through controlled elastic deformation and accurate tooth engagement, the product achieves high reduction ratio, excellent positioning accuracy, and smooth torque transmission within a compact structure.
We provide both standard and customized QDY-CDUH Harmonic Gear Reducers according to different customer requirements. Our engineering team evaluates important parameters including reduction ratio, rated torque, installation dimensions, backlash requirements, operating environment, and accuracy standards to provide suitable transmission solutions.
The QDY-CDUH Harmonic Gear Reducers are precision transmission components developed for modern intelligent automation systems. They are designed to meet the increasing demand for accurate motion control in industries such as robotics, CNC machining, semiconductor manufacturing, new energy production, and automated assembly.
Unlike traditional gear reducers that mainly depend on rigid gear transmission, harmonic gear reducers use flexible deformation technology. This unique structure allows multiple teeth to engage simultaneously, improving transmission accuracy while reducing mechanical clearance.
The QDY-CDUH series provides excellent performance in applications where installation space is limited but high precision movement is required. The compact structure allows engineers to design smaller equipment while maintaining strong transmission capability.
The main components of QDY-CDUH Harmonic Gear Reducers include:
Wave Generator: The input component that creates controlled deformation of the flex spline and transfers movement.
Flex Spline: A flexible gear component that changes shape during operation and enables precise motion transmission.
Circular Spline: A rigid gear component that works with the flex spline to achieve speed reduction.
Through the cooperation of these three core components, QDY-CDUH Harmonic Gear Reducers achieve high precision transmission, low backlash performance, stable torque output, and reliable operation.
For industrial robots and precision automation equipment, even small transmission errors may influence final product quality. Therefore, selecting a reliable harmonic gear reducer is important for improving equipment accuracy and production stability.
High Precision Transmission: The harmonic drive structure provides accurate movement control and supports applications requiring high positioning accuracy.
High Reduction Ratio: The compact transmission structure allows large speed reduction within a small installation space.
Low Backlash: Precision design reduces transmission clearance and improves repeated positioning performance.
High Torque Density: Multiple tooth engagement improves force distribution and provides stable output capability.
Compact Structure: The lightweight design makes the product suitable for robotic joints and precision automation equipment.
Long Service Life: Strict manufacturing control and professional inspection ensure stable operation under continuous working conditions.
Feature | QDY-CDUH Harmonic Gear Reducers | Application Value |
Transmission Structure | Wave generator, flex spline, and circular spline harmonic drive system | Provides accurate motion transmission |
Precision Performance | Low backlash and high repeat positioning accuracy | Improves automation equipment control |
Structural Design | Compact and lightweight reducer design | Saves installation space |
Torque Transmission | Multiple tooth engagement mechanism | Provides stable output performance |
Application Fields | Robotics, CNC, automation, semiconductor equipment | Supports intelligent manufacturing systems |
Source: Technical characteristics are based on harmonic transmission principles and Qiandeyi Transmission Technology product development experience.
The working principle of QDY-CDUH Harmonic Gear Reducers is based on harmonic transmission technology. Instead of relying only on rigid gear rotation, the system uses controlled elastic deformation to achieve precise speed reduction and power transmission.
When the motor drives the wave generator, the wave generator changes the shape of the flex spline. This creates continuous engagement between the flex spline and circular spline, generating the required reduction effect.
Because the flex spline and circular spline have different numbers of teeth, the reducer can achieve a high reduction ratio while maintaining a compact structure.
This transmission method provides excellent advantages including high accuracy, low backlash, smooth operation, and stable torque output, making QDY-CDUH Harmonic Gear Reducers suitable for precision motion control systems.
The special structure of QDY-CDUH Harmonic Gear Reducers allows multiple teeth to engage at the same time during operation. This improves load distribution and helps the reducer maintain stable performance under different working conditions.
Compared with many traditional transmission solutions, harmonic transmission technology provides higher precision within a smaller structure. This makes it especially suitable for robotic joints, precision positioning platforms, and compact automation systems.
Core Component | Main Function | Performance Contribution |
Wave Generator | Creates flex spline deformation and transfers input motion | Provides accurate transmission control |
Flex Spline | Transfers movement through elastic deformation | Improves positioning accuracy |
Circular Spline | Provides rigid tooth engagement support | Enhances load stability |
Source: Structural information is based on harmonic gear transmission design principles.
At Qiandeyi Transmission Technology, we understand that a precision harmonic gear reducer is not only a mechanical transmission component. It is also an important part that directly affects the accuracy, efficiency, and reliability of an entire automation system.
For this reason, we focus on every manufacturing detail, including component processing accuracy, assembly control, lubrication conditions, and final performance testing. The QDY-CDUH Harmonic Gear Reducers are developed to provide stable motion control solutions for demanding industrial applications.
Modern industrial equipment requires extremely accurate movement. In applications such as robot joints, semiconductor equipment, and precision inspection systems, even a small positioning error may influence production quality.
The QDY-CDUH Harmonic Gear Reducers use precision harmonic transmission technology to achieve accurate motion conversion. The low backlash design helps equipment maintain repeatable positioning accuracy during frequent operation.
This high precision performance allows automation systems to complete complex tasks with better stability and consistency.
Backlash is one of the key factors affecting precision transmission performance. Excessive mechanical clearance may cause positioning deviation, reduce response speed, and influence equipment accuracy.
Through optimized structural design and precision manufacturing processes, QDY-CDUH Harmonic Gear Reducers reduce internal transmission clearance and provide stable positioning performance for high precision applications.
This feature makes the product suitable for industrial robots, collaborative robots, CNC equipment, and other systems requiring repeated accurate movement.
Space utilization is becoming increasingly important in modern equipment design. Engineers need smaller components while maintaining strong performance and reliable operation.
The QDY-CDUH Harmonic Gear Reducers achieve a high reduction ratio within a compact housing. This allows equipment manufacturers to create smaller, lighter, and more flexible automation systems.
The compact design is especially suitable for robotic joints and precision motion platforms where installation space is limited.
High torque density means the reducer can provide strong output capability without increasing the overall equipment size. This is especially valuable in robotic applications where weight and space are important factors.
The multiple tooth engagement structure of QDY-CDUH Harmonic Gear Reducers improves force distribution and allows stable torque transmission under different working conditions.
This design helps equipment maintain reliable performance during acceleration, deceleration, and continuous operation.
Industrial equipment often operates for long hours every day. Transmission components need to maintain stable performance during repeated movement and changing loads.
The QDY-CDUH Harmonic Gear Reducers are manufactured with strict process control and tested for transmission accuracy, backlash, vibration, noise, torque performance, and reliability before shipment.
These quality control procedures help ensure stable operation and long service life in demanding industrial environments.
Performance Item | QDY-CDUH Harmonic Gear Reducers Feature | Industrial Benefit |
Transmission Accuracy | Precision Harmonic Drive structure | Improves equipment positioning performance |
Backlash Control | Low clearance transmission design | Supports repeated precision movement |
Torque Output | Multiple tooth engagement system | Maintains stable load transmission |
Running Stability | Precision manufacturing and inspection process | Reduces vibration and improves reliability |
Installation Flexibility | Compact and lightweight structure | Supports flexible equipment design |
Source: Performance comparison is based on harmonic reducer design characteristics and industrial automation application requirements.
With the development of intelligent manufacturing, more industries require accurate and reliable motion control solutions. The transmission system has become an important factor affecting equipment efficiency, production quality, and operating stability.
The QDY-CDUH Harmonic Gear Reducers are widely used in industries requiring high precision, compact design, and reliable performance, including industrial robotics, collaborative robots, CNC equipment, semiconductor systems, new energy equipment, and automated production lines.
Industrial robots perform complex tasks such as welding, assembly, handling, painting, and precision processing. Each robot axis requires a transmission component that can provide accurate movement and stable torque output.
The QDY-CDUH Harmonic Gear Reducers provide reliable joint transmission solutions with low backlash and high positioning accuracy. They help robotic systems achieve smoother movement and better repeatability.
Collaborative robots require lightweight and compact transmission components because they need flexible movement and precise control while working together with operators.
The compact structure and smooth operation characteristics of QDY-CDUH Harmonic Gear Reducers make them suitable for robotic joints, intelligent automation equipment, and human-machine collaboration systems.
CNC machine tools require stable and accurate rotation control to maintain machining quality. The transmission system directly affects processing accuracy, surface quality, and equipment reliability.
The QDY-CDUH Harmonic Gear Reducers can be used in rotary tables, precision positioning platforms, and automated machining systems. Their low backlash performance helps improve rotation accuracy and maintain stable operation during continuous processing.
Semiconductor manufacturing requires extremely precise mechanical movement because small positioning errors may affect production results. Wafer handling, inspection, and assembly equipment require highly reliable transmission solutions.
The QDY-CDUH Harmonic Gear Reducers provide smooth motion control and accurate positioning for semiconductor automation systems, supporting precision manufacturing environments.
The rapid growth of electric vehicles and renewable energy industries has increased demand for automated manufacturing equipment. Battery production lines, testing systems, and assembly machines require stable transmission components.
With high precision transmission and compact design, QDY-CDUH Harmonic Gear Reducers support accurate movement and reliable operation in new energy manufacturing systems.
Modern factories increasingly rely on automated production systems to improve efficiency, reduce production errors, and maintain consistent product quality. These systems often require transmission components that can perform repeated movement with high accuracy and stable operation.
The QDY-CDUH Harmonic Gear Reducers are suitable for automated assembly machines, inspection equipment, material handling systems, and intelligent manufacturing platforms. Their precision transmission capability helps equipment achieve smoother operation and reliable performance.
Application Industry | Typical Equipment | QDY-CDUH Application Advantage |
Industrial Robotics | Robot arms, welding robots, assembly robots | Provides accurate joint movement and stable torque transmission |
Collaborative Robots | Lightweight robotic joints | Supports flexible and precise motion control |
CNC Equipment | Rotary tables and machining systems | Improves positioning accuracy and processing stability |
Semiconductor Equipment | Wafer handling and inspection systems | Provides smooth and repeatable movement |
New Energy Equipment | Battery production and testing machines | Supports continuous automated operation |
Source: Application information is based on Qiandeyi Transmission Technology product experience and industrial automation requirements.
The performance of a precision harmonic gear reducer depends on many factors, including material quality, machining accuracy, assembly technology, lubrication conditions, and inspection procedures.
At Qiandeyi Transmission Technology, we control every important production step to ensure that QDY-CDUH Harmonic Gear Reducers maintain stable performance under real industrial working conditions.
For precision transmission products, small differences in component dimensions or assembly accuracy can influence backlash, efficiency, noise level, and service life. Therefore, we focus on detailed process management from raw materials to finished products.
Reliable raw materials provide the foundation for high-quality transmission components. Before manufacturing begins, we inspect materials to confirm their mechanical properties and suitability for precision processing.
Proper material selection improves component strength, wear resistance, and operating stability, helping QDY-CDUH Harmonic Gear Reducers achieve reliable long-term performance.
The wave generator, flex spline, and circular spline are the core components of QDY-CDUH Harmonic Gear Reducers. Their machining accuracy directly affects transmission performance.
We use professional production equipment and controlled manufacturing processes to maintain accurate dimensions, stable quality, and reliable component matching.
Precision machining is especially important for harmonic gear reducers because the interaction between flexible and rigid components determines transmission accuracy and operating smoothness.
During assembly, our technicians carefully control component matching, internal clearance, lubrication conditions, and installation accuracy.
Proper assembly adjustment helps QDY-CDUH Harmonic Gear Reducers achieve smooth transmission, low backlash performance, and stable torque output.
Each assembly process follows strict operating standards to reduce production variation and improve product consistency.
Before shipment, every QDY-CDUH Harmonic Gear Reducers completes professional inspection to verify performance and reliability under expected working conditions.
Transmission accuracy testing
Backlash measurement
Torque performance inspection
Operating noise testing
Vibration evaluation
Load capability verification
Reliability testing
Inspection Item | Testing Purpose | Quality Benefit |
Transmission Accuracy | Verify motion precision | Ensures accurate equipment movement |
Backlash Test | Measure mechanical clearance | Improves positioning repeatability |
Torque Test | Check output capability | Supports stable load operation |
Noise and Vibration Test | Evaluate running stability | Provides smoother operation |
Reliability Test | Verify long-term operating performance | Improves service confidence |
Source: Quality inspection information is based on Qiandeyi Transmission Technology manufacturing and testing procedures.
For industrial automation customers, delivery reliability is as important as product performance. A suitable supplier should not only provide quality products but also support customers throughout the whole project process.
At Qiandeyi Transmission Technology, we provide complete service from technical communication, product selection, manufacturing, inspection, and shipment preparation.
The standard production cycle of QDY-CDUH Harmonic Gear Reducers is generally 15–30 days. Customized products usually require 30–45 days depending on reduction ratio, rated torque, installation dimensions, backlash requirements, precision level, operating environment, and order quantity.
Before production, our engineering team confirms customer requirements, including equipment application, motor parameters, load conditions, installation method, and expected performance.
During manufacturing, every important process is controlled carefully, including precision machining, component inspection, assembly adjustment, and final testing. This ensures every QDY-CDUH Harmonic Gear Reducers can provide stable performance after delivery.
Service Process | Standard Information | Customer Benefit |
Technical Communication | Application evaluation and specification confirmation | Helps select suitable transmission solutions |
Standard Production | 15–30 days | Meets normal project schedules |
Customized Production | 30–45 days | Supports special application requirements |
Final Inspection | Accuracy, backlash, torque, vibration, noise, and reliability testing | Ensures stable product performance |
Source: Production and service information is based on Qiandeyi Transmission Technology manufacturing standards.
We provide flexible payment solutions according to different customer project requirements. The standard payment method for QDY-CDUH Harmonic Gear Reducers is T/T bank transfer.
For large-volume orders, long-term cooperation projects, and customized automation programs, L/C payment terms can be discussed according to customer requirements.
During cooperation, we maintain clear communication regarding product specifications, production progress, inspection results, and delivery schedules to ensure smooth project execution.
Different customers have different delivery requirements. Some projects require faster transportation, while others focus on transportation cost control for larger quantities.
We select suitable transportation methods according to destination, order quantity, and required delivery time.
International Express: Suitable for samples, small orders, and urgent delivery requirements.
Air Freight: Suitable for customers requiring shorter transportation time and faster project progress.
Sea Freight: Suitable for large quantity orders requiring economical international transportation.
Railway Transportation: Suitable for selected international routes requiring stable transportation performance.
QDY-CDUH Harmonic Gear Reducers contain precision mechanical components, so proper packaging is important to protect product quality during international transportation.
Each product is protected with shockproof foam, moisture-proof sealed bags, and independent cartons. These packaging methods help prevent damage caused by vibration, impact, dust, and moisture.
For bulk orders, we use export wooden cases or pallet fixing packaging to provide stronger protection during long-distance international transportation.
Selecting a harmonic gear reducer supplier is not only about comparing product specifications. For automation equipment manufacturers, stable quality, technical capability, manufacturing experience, and reliable delivery are important factors for long-term cooperation.
Qiandeyi Transmission Technology (Suzhou) Co., Ltd. was established on July 31, 2013, and is located in Huaqiao Town, Kunshan City, Jiangsu Province, China.
We are a national high-tech enterprise integrating research and development, manufacturing, sales, and service. We specialize in the design and manufacturing of core components for intelligent and automated equipment.
Our company provides one-stop intelligent drive solutions, including ATG Precision Planetary Gearboxes, harmonic gearboxes, Hollow Rotary Platforms, RV gearboxes, Commutators, splitters, Joint modules, and Worm Gear Reducers.
These products are widely used in industrial robots, CNC machine tools, automated production lines, logistics equipment, new energy manufacturing systems, and intelligent manufacturing fields. Our products have been supplied to customers in more than 30 countries.
Precision transmission components require professional manufacturing experience because small details can influence final performance.
Our core production team has more than 20 years of industry experience. We understand the importance of machining accuracy, component matching, assembly control, and performance testing.
Through continuous improvement of production technology, we provide reliable QDY-CDUH Harmonic Gear Reducers for different automation applications.
Qiandeyi Transmission Technology has obtained ISO9001, ISO14001, and ISO45001 triple-system certification. These management systems support continuous improvement in product quality, environmental management, and production safety.
From raw material inspection to finished product shipment, we implement full-process quality control. Every QDY-CDUH Harmonic Gear Reducers must pass professional testing before delivery.
Different industries have different requirements for precision transmission systems. A robot joint may require extremely low backlash and fast response, while an automated production machine may focus more on stable torque output and long service operation.
At Qiandeyi Transmission Technology, we provide customized QDY-CDUH Harmonic Gear Reducers based on actual customer applications. Our engineering team analyzes equipment conditions and provides suitable transmission solutions.
Our customization services include:
Reduction ratio selection
Rated torque optimization
Installation dimension adjustment
Output structure customization
Backlash requirement control
Precision level adjustment
Special environment adaptation
By combining engineering experience with manufacturing capability, we help customers develop reliable transmission solutions for industrial robots, automation equipment, CNC systems, and precision machinery.
Capability | Customer Value |
Precision transmission component manufacturing | Provides reliable motion control performance |
Experienced engineering team | Offers professional application support |
Advanced production equipment | Ensures stable product consistency |
Complete testing process | Improves product reliability |
Customized development ability | Supports different industrial requirements |
Source: Company capability information is based on Qiandeyi Transmission Technology manufacturing experience and service system.
QDY-CDUH Harmonic Gear Reducers are precision transmission components designed for intelligent automation equipment requiring high accuracy, low backlash, compact structure, and stable motion control.
The product uses harmonic drive technology with a wave generator, flex spline, and circular spline. Through controlled elastic deformation, it achieves high reduction ratio and precise power transmission.
The compact structure and accurate transmission characteristics make QDY-CDUH Harmonic Gear Reducers suitable for robotic joints, precision equipment, and automated systems.
The main advantages of QDY-CDUH Harmonic Gear Reducers include:
High precision transmission
Low backlash performance
High reduction ratio
High torque density
Compact structure
Smooth operation
Long service life
These advantages allow the product to meet the requirements of modern automation equipment and precision motion control applications.
The selection of a harmonic gear reducer depends on several important factors, including reduction ratio, output torque, motor specification, installation space, accuracy requirement, operating speed, and working environment.
For robotic applications, customers usually focus on compact size, low backlash, and high positioning accuracy. For industrial automation systems, stable operation and load capability are also important.
Our technical team provides product recommendations according to the customer's actual equipment requirements.
Yes. We provide customized harmonic gear reducer solutions according to different application requirements.
Customization can include reduction ratio, rated torque, mounting structure, output design, backlash level, accuracy requirements, and special working conditions.
Our engineering team works closely with customers to ensure that the selected QDY-CDUH Harmonic Gear Reducers match the actual requirements of their equipment.
QDY-CDUH Harmonic Gear Reducers are widely used in industries requiring precise movement and reliable transmission performance, including:
Industrial robots
Collaborative robots
Robot arms
CNC machine tools
Semiconductor manufacturing equipment
New energy production equipment
Automated assembly lines
Precision inspection systems
Intelligent manufacturing systems
The standard production cycle of QDY-CDUH Harmonic Gear Reducers is generally 15–30 days.
Customized products usually require 30–45 days depending on reduction ratio, rated torque, installation dimensions, precision requirements, backlash specifications, application environment, and order quantity.
We implement complete quality control throughout the manufacturing process. From raw material inspection and precision machining to assembly and final testing, every production stage is carefully controlled.
Before shipment, each QDY-CDUH Harmonic Gear Reducers is tested for transmission accuracy, backlash, torque performance, vibration, noise, load capability, and reliability.
The standard payment method is T/T bank transfer. For large-volume projects and long-term cooperation orders, L/C payment terms can be discussed according to customer requirements.
Transportation methods include international express, air freight, sea freight, and railway transportation.
Products are packed with shockproof foam, moisture-proof sealed bags, independent cartons, and export wooden cases or pallet packaging for bulk orders to ensure safe delivery.
The QDY-CDUH Harmonic Gear Reducers are designed to provide high precision transmission, stable operation, and reliable motion control solutions for modern automation equipment.
With advantages including low backlash, high reduction ratio, high torque density, compact structure, and smooth operation, the product meets the requirements of industries that require accurate and reliable movement.
As manufacturing industries continue to move toward automation and intelligence, precision transmission components play an increasingly important role. Equipment manufacturers need reducers that can maintain stable performance during high-frequency operation, repeated positioning, and long production cycles.
The QDY-CDUH Harmonic Gear Reducers combine harmonic drive technology, precision manufacturing processes, and strict inspection procedures to help customers improve equipment accuracy, production stability, and operational efficiency.
At Qiandeyi Transmission Technology, we focus on developing and manufacturing core transmission components for intelligent equipment. With professional production capability, experienced technical teams, and complete quality management systems, we provide reliable drive solutions for customers around the world.
Our product range includes ATG Precision Planetary Gearboxes, harmonic gear reducers, hollow rotary platforms, RV gearboxes, commutators, splitters, joint modules, and worm gear reducers. These products are widely used in industrial robotics, CNC machine tools, automated production lines, logistics equipment, semiconductor systems, and new energy manufacturing equipment.
Whether customers need standard QDY-CDUH Harmonic Gear Reducers or customized transmission solutions, our engineering team provides support from product selection, technical communication, manufacturing, quality inspection, and delivery.
Product Item | Description |
Product Name | QDY-CDUH Harmonic Gear Reducers |
Product Type | Precision harmonic transmission reducer |
Core Structure | Wave generator, flex spline, and circular spline harmonic drive system |
Main Advantages | High precision, low backlash, high reduction ratio, compact structure, stable operation |
Application Areas | Industrial robots, collaborative robots, CNC equipment, semiconductor systems, automation equipment |
Standard Production Cycle | 15–30 days |
Customized Production Cycle | 30–45 days |
Quality Testing | Transmission accuracy, backlash, torque, vibration, noise, load capability, reliability testing |
Payment Method | T/T bank transfer, L/C available for large projects |
Transportation Method | International express, air freight, sea freight, railway transportation |
Packaging Method | Shockproof foam, moisture-proof sealed bags, cartons, export wooden cases or pallet packaging |
Source: Product information is based on Qiandeyi Transmission Technology product specifications and service standards.
Qiandeyi Transmission Technology (Suzhou) Co., Ltd. was established on July 31, 2013, and is located in Huaqiao Town, Kunshan City, Jiangsu Province, China.
We are a national high-tech enterprise integrating research and development, manufacturing, sales, and service. We specialize in the design and manufacturing of core components for intelligent and automated equipment.
Our company has deep expertise in precision transmission technology. We introduce advanced manufacturing technology and production processes, equipped with professional production equipment and high-precision testing instruments.
Our core production team has more than 20 years of industry experience. From raw materials to finished products, we implement full-process quality control to ensure that products meet demanding industrial application requirements.
We have obtained ISO9001, ISO14001, and ISO45001 triple-system certification. Through continuous improvement of manufacturing processes and quality management, we provide stable and reliable products for global customers.
With customers across more than 30 countries, we continue to support the development of intelligent manufacturing, industrial automation, and precision motion control industries.
Word Count: Approximately 3500 words for the complete QDY-CDUH Harmonic Gear Reducers product page.
RELATED
RELATED
RELATED
RELATED
Этот веб-сайт использует файлы cookie, чтобы обеспечить вам максимально эффективное использование нашего веб-сайта.
EN
Español
Deutsch
Tiếng Việt
телефон